Pololu 8-35V 2A Enkele Bipolaire Stappenmotoraandrijving A4988

PololuArtikelnummer:RB-Pol-176
Fabrikant #: 1182

Prijs  :
Verkoopprijs €16,08

Inclusief belasting

Verzending berekend bij het afrekenen

Voorraad  :
Op voorraad, 3 stuks

Betalingen en veiligheid

Apple Pay Mastercard PayPal Visa

Uw betalingsgegevens worden veilig verwerkt. We slaan geen creditcardgegevens op en hebben ook geen toegang tot uw creditcardgegevens.

Description

  • Breakout-bord voor Allegro's A4988 microstepping bipolaire stappenmotorbesturing
  • Eenvoudige interface voor besturing van stap en richting
  • Werkt op 8-35 V en levert tot 2A per spoel
  • Instelbare stroombegrenzing en vijf verschillende microstep-resoluties

De Pololu 8-35V 2A Enkele Bipolaire Stappenmotoraandrijving A4988 is een breakout-bord voor Allegro's gebruiksvriendelijke A4988 microstepping bipolaire stappenmotoraandrijving en is een vervanging voor de A4983 stappenmotorbesturingsdrager. De bestuurder heeft instelbare stroombeperkende, overstroombeveiliging en vijf verschillende microstep-resoluties.

Pololu 8-35V 2A Enkele Bipolaire Stappenmotoraandrijving A4988 - Klik om te vergroten

Deze breakout-printplaat voor Allegro's A4988 microstepping bipolaire stappenmotordriver heeft instelbare stroombegrenzende, overstroom- en oververhittingsbeveiliging en vijf verschillende microstep-resoluties (tot 1/16-stap). Hij werkt van 8 V tot 35 V en kan tot ongeveer 1 A per fase leveren zonder koellichaam of geforceerde luchtstroom (hij is geschikt voor 2 A per spoel met voldoende extra koeling). Dit bord wordt geleverd met pennen van 0,1 "inclusief mannelijke koppen, maar niet erin gesoldeerd.


Kenmerken :
Eenvoudige interface voor besturing van stap en richting
Intelligente hakcontrole die automatisch de juiste stroomvervalmodus selecteert (snel verval of langzaam verval)
Vijf verschillende stapresoluties: volledige stap, halve stap, kwart stap, achtste stap en zestiende stap
Thermische uitschakeling bij te hoge temperatuur, uitsluiting onder spanning en bescherming tegen overstroom
Kort tot grond en kortgesloten bescherming

  • Grootte: 0.6 "x 0.8"
  • Gewicht: 1,3 g

PDF-bestanden :

  • Minimale bedrijfsspanning: 8 V
  • Maximale bedrijfsspanning: 35 V
  • Continue stroom per fase: 1 A
  • Maximale stroom per fase: 2 A
  • Minimale logische spanning: 3 V
  • Maximale logische spanning: 5,5 V
  • Microstep-resoluties: vol, 1/2, 1/4, 1/8 en 1/16
  • Beveiliging tegen omgekeerde spanning: N
  • Kopbalpennen gesoldeerd: N

Customer Reviews

Based on 24 reviews
71%
(17)
21%
(5)
0%
(0)
8%
(2)
0%
(0)
k
ken
Pilote pas à pas

Belle petite unité fonctionne selon les spécifications

R
Rayne
Fonctionne très bien et de petite taille

Taille parfaite pour en insérer quelques-uns dans une planche à pain pour tester les moteurs pas à pas

J
James
NICE DRIVER

This is a really nice stepper driver, with good instructions so you can easily use the micro-stepping modes, current limiting, etc., to get the max performance out of your motor. Even if you don't want to use the features, just leave the mode pins unconnected and you have a simple 2-wire interface to run the 4-wire motor. You can't beat this device for the money. Does get hot if you leave the enable pin on.

M
Mike
Worked great

I have a 12 volt stepper salvaged from a disk drive. I connected it using an Arduino Uno. Ran the sketches with no problems.

R
Richard
Tiny and nice

Needed to add heat sinks at the bottom of the pcb where the thermal vias are and a copper heat sink on the top of the chip; the way I've used it temps got >>80 degrees C; now it works fine. Sometimes my steppers are showing strange things (stepping back instead of forward); probably a temp thing because it only happens after driving them for a while. For "lights" stuff this is more than ok!

Verzending schatten:

Dit vind je misschien ook leuk