M5Stack ATOM Matrix ESP32 Development Kit met MPU6886

M5StackArtikelnummer:RB-Mst-35
Fabrikant #: C008-B

Prijs  :
Verkoopprijs €17,53

Inclusief belasting

Verzending berekend bij het afrekenen

Voorraad  :
Op voorraad, 3 stuks

Betalingen en veiligheid

Apple Pay Mastercard PayPal Visa

Uw betalingsgegevens worden veilig verwerkt. We slaan geen creditcardgegevens op en hebben ook geen toegang tot uw creditcardgegevens.

Description

  • M5Stack ATOM Matrix ESP32 Development Kit met MPU6886
  • Beschikt over een 5x5 RGB LED-matrixpaneel
  • Ingebouwde infrarood-LED en programmeerbare knop
  • Wordt geleverd met Wi-Fi- en Bluetooth-technologieën
  • Biedt ingebouwde USB-interface (Type-C)
  • Programmaplatform: Arduino UIFlow

De M5Stack ATOM Matrix ESP32 Development Kit met MPU6886 is het meest compacte ontwikkelbord in de M5Stack-ontwikkelingskitserie. Het biedt meer GPIO-pinnen en is zeer geschikt voor het ontwikkelen van handige en miniatuur embedded apparaten.

De hoofdbediening maakt gebruik van de ESP32-PICO-D4-chip, die is geïntegreerd met Wi-Fi- en Bluetooth-technologieën en heeft 4 MB geïntegreerd SPI-flashgeheugen.

Het Atom-bord biedt een infrarood-LED samen met de 5 x 5 RGB LED-matrix op het paneel, een ingebouwde IMU-sensor (MPU6886) en een YH2.0-interface. Onder de RGB Led-matrix bevindt zich een programmeerbare knop voor algemene doeleinden waarmee gebruikers invoerondersteuning kunnen toevoegen aan hun verschillende projecten.

OPMERKING : De helderheid van de RGB-led is beperkt tot 20. Pls, stel deze NIET hoger in om schade aan de led en het acrylscherm te voorkomen.

  • 1 x AM5Stack ATOM Matrix ESP32 Development Kit met MPU6886

Grootte

  • 24 x 24 x 14 mm
  • ESP32: 240 MHz dual-core, 600 DMIPS, 520 KB SRAM, Wi-Fi, dual-mode Bluetooth
  • Flash: 4 MB
  • Opgenomen vermogen: 5 V bij 500 mA
  • Poort: TypeC x 1, GROVE (I2C + I/0 + UART) x 1
  • PIN-poort: G19, G21, G22, G23, G25, G33
  • RGB-led: WS2812B x 25
  • MEMS: MPU6886
  • IR: infraroodtransmissie
  • Knop: aangepaste knop x 1
  • Antenne: 2.4G 3D-antenne
  • Bedrijfstemperatuur: 32 tot 104 °F (0 tot 40 °C)
  • Gewicht: 14 gram
  • Materiaal behuizing: kunststof (pc)

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael
Tant de fonctionnalités dans un petit paquet!

Je les utilise comme voyants de pointage connectés au réseau sur les caméras à l'église, mais j'ai commencé à explorer les autres façons de les utiliser ! Il y a tellement de fonctionnalités intéressantes dans un si petit paquet.

A
Anthony
Un produit amusant mais un peu délicat pour configurer les communications USB

C'est un produit amusant et très utile. Cependant, Windows 10 ne configurera pas automatiquement le port série nécessaire pour le pilote USB. Vous devez télécharger le CDM v2.12.28 WHQL Certified.zip à partir de https://ftdichip.com/drivers/d2xx-drivers/ et utiliser le gestionnaire de périphériques Windows pour charger ces pilotes pour le périphérique inconnu qui apparaît dans le Gestionnaire de périphériques lorsque vous vous connectez le câble USB

A
Anthony
A fun product but a bit tricky to setup USB communications

This is a fun product and very useful. However, Windows 10 will not automatically set up the necessary serial com port to the USB driver. You need to download the CDM v2.12.28 WHQL Certified.zip from https://ftdichip.com/drivers/d2xx-drivers/ and use Windows device manager to load those drivers for the unknown device that appears in Device Manager when you plug in the USB cable

M
Michael
So many features in a small package!

I am using these as network connected tally lights on cameras at church but have started exploring the other ways I can use them! There are so many cool features packed into such a small package.

Verzending schatten:

Dit vind je misschien ook leuk