Waveshare Raspberry Pi Compute Module 3+ Development Kit Type A (EU)
Includes Compute Module IO Board Plus for extended interfaces
Supports Raspberry Pi and Arduino connectivity
Equipped with Broadcom BCM2837B0 processor at 1.2GHz
Features onboard USB hub and IR receiver
Ideal for reducing development cycle with flexible use
The Waveshare Raspberry Pi Compute Module 3+ Development Kit Type A (EU) is designed to facilitate the evaluation and development of projects using the Raspberry Pi Compute Module 3+. This comprehensive kit includes the Compute Module IO Board Plus, which extends various interfaces from the Compute Module 3+, such as USB and HDMI, akin to a standard Raspberry Pi. This feature-rich board supports a wide range of connectivity options, including Raspberry Pi GPIO headers for HATs, Arduino shields, and a 1-WIRE interface for single-bus devices.
The development kit is equipped with a Broadcom BCM2837B0 processor, a Cortex-A53 (ARMv8) 64-bit SoC running at 1.2GHz, and 1GB of RAM. It offers multiple eMMC flash options and supports a variety of operating systems, including a specific version of Windows 10 IoT. The IO Board Plus is compatible with the Compute Module IO Board V3 and includes features such as an onboard USB hub, IR receiver, and USB to UART for serial debugging.
Additional components include a DS18B20 temperature sensor, an IR remote controller, and various cables and adapters to enhance connectivity and functionality. The kit is ideal for developers seeking to reduce their development cycle and explore the capabilities of the Raspberry Pi Compute Module 3+ in a flexible and efficient manner.
1x Waveshare Raspberry Pi Compute Module 3+ Development Kit Type A (EU)
1x Compute Module IO Board Plus
1x DS18B20 Temperature sensor
1x IR remote controller
1x LCD adapter
1x 22pin FFC
1x RPi Zero V1.3 camera cable 15cm
1x Power adapter 5V/3A Micro
2x USB Type A plug to Micro B plug cable 120cm
2x Jumper wire 4-pin to separated pins
2x Jumper wire 2-pin 2.54-pitch 200mm
Broadcom BCM2837B0 processor
Cortex-A53 (ARMv8) 64-bit SoC at 1.2GHz
1GB RAM
eMMC Flash memory
200-pin SODIMM connector with 35U hard gold plating I/O pins
48 GPIO pins
2 I2C interfaces
2 SPI interfaces
2 UART interfaces
2 SD/SDIO interfaces (1 SD used for eMMC Flash on non-Lite variants)
1 HDMI 1.3a port
1 USB2 HOST/OTG port
1 DPI (parallel RGB display) interface
1 NAND (SMI) interface
1 4-lane CSI Camera Interface (up to 1Gbps per lane)
1 2-lane CSI Camera Interface (up to 1Gbps per lane)
1 4-lane DSI Display Interface (up to 1Gbps per lane)
1 2-lane DSI Display Interface (up to 1Gbps per lane)
Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation
Raspberry Pi GPIO header for connecting various Raspberry Pi HATs
Arduino connectivity, supports Arduino shields
1-WIRE interface for connecting single-bus devices like DS18B20
4 keys, 4 LEDs, 1 buzzer for I/O testing
Onboard USB hub for connecting additional USB devices
IR receiver for IR remote control
Onboard USB to UART for serial debugging
Sensor interface
10-bit ADC, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
European consumers exercising their statutory Right of Withdrawal are subject to different conditions. See the Statutory Right of Withdrawal.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A €100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables * — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly * — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps * — Final sale only, due to licensing restrictions.
Clearance Items * — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items * — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
* European consumers retain their statutory Right of Withdrawal on these items. Its exercise is subject to the conditions and exclusions set out in the Statutory Right of Withdrawal, and any reimbursement may be reduced to reflect a loss in value resulting from handling beyond inspection.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".