Help?
Help?
Turtlebot 4 Pro
Help?
Help?
Description
- Irobot Create 3 platform
- Ubuntu 20.04 and ROS Noetic
- SLAMTEC RPLiDAR
- Luxonis DepthAI 3D camera
The Turtlebot 4 Pro and Turtlebot 4 Lite are produced by Clearpath Robotics from Canada and operated under the OSRF (Open Source Robotics Foundation) as an official ROS 2.0 development platform. Like the Turtlebot 1, this robot is based on a chassis from iRobot, the so called Create 3 platform.
Like its predecessors, the new TB4 is delivered with an extensive software base, which should offer a quick and easy entry into ROS, especially the ROS 2.0 framework. This includes a complete SLAM & Navigation Stack, as well as a very good Gazebo simulation. This means that fewer Turtlebots are needed for teaching at the beginning, since the simulation environment can be used for theoretical content first.
The three biggest differences between the TB4 Pro and the TB4 Lite are as follows: the TB4 Lite is a kit, while the TB4 Pro comes fully assembled; the TB4 Lite uses an OAK D Lite, while the TB4 Pro uses an OAK D Pro; and both platforms have a SLAMTEC LiDAR installed. Additionally, the TB4 Pro comes with mounting plates for additional equipment.
1x Turtlebot 4 (Create 3, Raspberry Pi 4, LiDAR, 3D Camera & Accessories)
1x Docking station
Maximum Payload: 9 to 15 Kg (depending on configuration)
Charge Time: 2.5 Kg
Sensors:
RPLiDAR A1
OAKL D PRO
Raspberry Pi 4B (4GB)
Software: Ubuntu 20.04, ROS 2.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
European consumers exercising their statutory Right of Withdrawal are subject to different conditions. See the Statutory Right of Withdrawal.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A €100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables * — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly * — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps * — Final sale only, due to licensing restrictions.
- Clearance Items * — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items * — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
* European consumers retain their statutory Right of Withdrawal on these items. Its exercise is subject to the conditions and exclusions set out in the Statutory Right of Withdrawal, and any reimbursement may be reduced to reflect a loss in value resulting from handling beyond inspection.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets, or contact us through our Support Center.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".