Lynxmotion SES-V2 Standard Smart Servo (LSS-ST1)
Description
- Lynxmotion SES-V2 Standard Smart Servo (LSS-ST1)
- Features a configurable, modular smart servo motor
- Designed for the Lynxmotion Servo Erector Set (SES)
- 60RPM - no load (12V)
- 14 Kg-cm max static torque & 2.8 Kg-cm max dynamic torque (12V)
- Metal gears, RGB LED bar, sensor feedback, button interface
- Smart / wheel / RC modes
- Now with Full Aluminum Body (NEW)
The Lynxmotion SES-V2 Standard Smart Servo (LSS-ST1) are new compact, modular actuators which were designed to be an evolution of the standard RC servo for use in multi degree-of-freedom robots, animatronics, custom RC projects and more. The lineup currently includes three “smart servos” which differ in maximum torque and speed, and share the same dimensions, mounting points and output spline.
The servos form the core modules of the next generation Lynxmotion Servo Erector Set (S.E.S.) and a wide variety of modular brackets, mechanics and electronics have been designed around them. "Smart" means each servos' parameters are user-modifiable and configurable, there is sensor feedback (Voltage, Current, Temperature, Position, and RPM), built-in safety features, and although they work best when connected to a microcontroller or computer, can be used as advanced RC actuators.
The custom LSS serial protocol was built upon the SSC-32 / 32U protocol and makes communicating with and configuring the servos one of the easiest and most intuitive to use.
Note: The servo cannot be used on its own as no communication interface is included with the servo. The suggested serial interface is the


Lynxmotion Smart Servo Brackets
Lynxmotion's Smart Servos are designed to be part of the Lynxmotion Servo Erector Set (SES) modular robot building system and are compatible with dozens of brackets and frame components.

The
The Lynxmotion SES-V2 Power Distribution Board for LSS (LSS-HUB) provides a simple solution to supply power to and communicate with the smart servos. It is also a useful tool to split the LSS bus from one servo to two or three while allowing these servos to be powered separately. The Power Hub can be mounted directly to the servos.

Custom designed gears can be used to provide external gearing for the Lynxmotion Smart Servo (LSS) motors.

Lynxmotion SES-V2 Geared Gripper Kit
The Lynxmotion SES-V2 Geared Gripper Kit is made of durable aluminum plates and standoffs and uses foam to conform to the object being grasped. Inner teeth on the aluminum help "bite" into objects when necessary.

Lynxmotion LSS Configuration Software or LSS-Config (Download)
The Lynxmotion LSS Configuration Software or LSS-Config (Download) provides easy access to viewing and modifying of the various settings that control the main features and functionality of the Lynxmotion Smart Servo Motors as well as allowing firmware updates.

- 1x Lynxmotion Smart Servo - Standard (ST1)
- 1x Aluminum driving horn (SES pattern) pre-assembled
- 1x Idler horn (SES pattern) pre-assembled
- 1x Cable: 150mm long 4-pin Molex to 4-pin Molex
- 1x Cable: 150mm long 4-pin Molex to 3-pin 2.54mm “RC Standard” connector plus 2.54mm single pin connector
Size
- 51 x 25 x 38.3 mm (case only)
- Nominal Voltage (recommended): 12V (6V min, 12.6V max)
- Torque, max. static at 12 V: 14 Kg-cm
- Torque, max dynamic at 12 V: 2.8 kg-cm
- Speed, no load at 12 V: 60 RPM
- Current, no load, standby at 12V: 70 mA
- Current, stall at 12V: 300 mA
- Operating temperature range: 45 ~67 °C
- Spline: 24 Tooth (compatible with Hitec standard spline)
- DC Motor: Cored
- Gear ratio: 1:253
- Gear material: Copper
- Operating angle: 360° absolute and virtual multi-turn
- Communication type: TTL full duplex asynchronous serial or RC PWM.
- Communication protocol: Custom Lynxmotion Smart Servo (LSS)
- Baudrate range: 9600 bps ~ 921600 bps
- Baudrate (recommended) : 115200 bps
- Connector: Molex 4-pin, 2.54 mm Low Profile (pinout: Rx | Vcc | GND | Tx)
- Weight: 74.0g
Pour une critique, j'ai écrit un article sur ce blog et les composants associés de LSS. http://g2micro.com/?p=77&preview=true&_thumbnail_id=82
Remember that time you carefully bought something with proper specs from Alibaba and it lived up to its description? I bet you don't. Wanna stop messing around and buy a great, powerful, and simple to use servo? Buy this one. (I also loved their other, similar one, HT-1)
For a review I wrote a blog post on this and associated LSS components. http://g2micro.com/?p=77&preview=true&_thumbnail_id=82
Love the design of these servos. The ST1 is rated as standard but kicks the "market" standard out the water. Great modular connections and interface is great. So good to have a servo that can be used for so many applications. I cannot see myself using other servos for my projects.
Vous souvenez-vous du moment où vous avez soigneusement acheté quelque chose avec les spécifications appropriées d'Alibaba et que cela correspondait à sa description? Je parie que non. Vous voulez arrêter de jouer et acheter un servo génial, puissant et simple à utiliser? Achetez celui-ci. (J'ai aussi aimé leur autre semblable, HT-1)
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
European consumers exercising their statutory Right of Withdrawal are subject to different conditions. See the Statutory Right of Withdrawal.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A €100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables * — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly * — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps * — Final sale only, due to licensing restrictions.
- Clearance Items * — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items * — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
* European consumers retain their statutory Right of Withdrawal on these items. Its exercise is subject to the conditions and exclusions set out in the Statutory Right of Withdrawal, and any reimbursement may be reduced to reflect a loss in value resulting from handling beyond inspection.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets, or contact us through our Support Center.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".