Lynxmotion HQuad500 Drone Kit (Hardware Only)
Description
- HQuad500 Frame and mounting hardware
- Tube and clamp design that allows for modularity
- Strong but lightweight construction at 383g for the assembly
- Requires: electronics, motors, propellers, battery
Verify your country's laws and regulations for Drone and Unmanned Aircrafts use. Registration of Unmanned Aircrafts is made mandatory in many countries and you are responsible to verify and to comply these regulations.
The Lynxmotion HQuad500 Drone (Hardware Only) is a 500mm quadcopter built using the new Lynxmotion M.E.S. (MultiRotor Erector Set) system. The design uses our new aluminum clamps along with 16mm carbon fiber tubes. This combination of parts allows the frame to be:
- Incredibly rigid (minimal flexing)
- Versatile (Integrated mounting for upgrades)
- Lightweight (use of composites and Aluminum)
- Modular (change the frame / use different length tubes)

We equipped the HQuad500 with a camera plate up front which is removable. Different plates will be available as well as a stabilized gimbal system. The flight controller mounting is located at the "dead center" of the frame with slots accommodating 30.5mm to 45mm mounting.
The frame is compatible with the
- HQuad500 Hardware, which includes:
- 1x Center body (three plates)
- 4x Motor Mount (top and bottom)
- 4x Tip landing gear
- 4x Tip cover plate
- 4x ESC mounting plate
- 1x Camera plate
- 8x Lynxmotion UAV - 16mm Clamps (2 Pack)
- 4x Lynxmotion 220mm Carbon Fiber Tubes (2 pack)
- 1x HQuad500 Hardware Bag
- 2x 9" Lynxmotion Velcro Cinch Strap (VCS-09)
J'ai dû monter mon FC sur l'extérieur supérieur sous la plaque de protection car le pylône hexagonal en aluminium situé entre les plaques supérieure et inférieure bloquait mon port de réglage USB. Maintenant, mes batteries et mon câblage doivent avoir l'air bâclés pour s'adapter à cela. Vous ne pouvez pas allumer le FC de toute autre manière. De plus, les escs sont montés à l’extérieur, car les fils s’entassent si mal au centre. J'aime la qualité de la construction et l'esthétique générale de la conception. Mais il n'y a tout simplement pas de place pour monter des composants électroniques de manière à rendre le câblage soigné. Nous pourrions aussi bien piloter une boule de fils avec des accessoires collés à notre.
This frame fit my needs as it require some basic assembly (which i like) and once together provide a strong platform for Quadcopter development or fun flying. With this version you have the choice of motor and electronic and the frame allow for most brand on the market today.
I had to mount my FC on the upper outside under the protection plate because the aluminum hex pylon between upper and lower plates blocked my usb tuning port. Now, my batteries and wiring have to look sloppy to accommodate for this. You cannot turn the FC any other way. Plus the escs are mounted on the outside because the wires bunch up so badly inside the middle. I love the build quality and the overall asthetics of the design. But there's just no room to mount electronics in a way that makes the wiring look neat. Might as well be piloting a ball of wires with props sticking our.
I'm building the HQuad500 in stages. This order was for the physical frame which fit together very nicely. Something seems a little off with the holes on the camera mount, but it did eventually fit together. Once assembled it feels quite solid. Anyone know the part number for the wheel kit? Saw it once and can't seem to find it again
Je construis le HQuad500 par étapes. Cette commande était pour le cadre physique qui s'emboîtait très bien. Quelque chose semble un peu louche avec les trous sur la monture de la caméra, mais cela a fini par s'emboîter. Une fois assemblé, il semble assez solide. Quelqu'un connaît-il le numéro de pièce du kit de roue? Je l'ai vu une fois et ne semble pas pouvoir le retrouver
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
European consumers exercising their statutory Right of Withdrawal are subject to different conditions. See the Statutory Right of Withdrawal.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A €100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables * — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly * — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps * — Final sale only, due to licensing restrictions.
- Clearance Items * — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items * — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
* European consumers retain their statutory Right of Withdrawal on these items. Its exercise is subject to the conditions and exclusions set out in the Statutory Right of Withdrawal, and any reimbursement may be reduced to reflect a loss in value resulting from handling beyond inspection.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets, or contact us through our Support Center.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".



