Luxonis OAK-D-PoE 12MP AI Camera Module

• Luxonis OAK-D-PoE 12MP AI Camera Module
• Offers full 802.3af, Class 3 PoE compliance
• Comes with three onboard cameras
• Provides an interface for OAK-SoM-Pro
• Features 3.1 Gen1 Type-C USB
• Fully compatible with all OAK-D features

The Luxonis OAK-D-PoE 12MP AI Camera Module offers full 802.3af, Class 3 PoE compliance with 1000BASE-T speeds. The OAK-D-POE baseboard has three onboard cameras which implement stereo and RGB vision, piped directly into the DepthAI SoM for depth and AI processing.

The data is then output to a host via USB 3.1 Gen1 (Type-C) or via 1000BASE-T ethernet connection. The OAK-D-POE board exposes boot selection switches, allowing the end-user to boot the OAK-SoM-Pro module from USB or the onboard eMMC or NOR flash.

The OAK-D-POE accepts power input from any 802.3af, Class 3 PoE circuitry. So this for example includes any/every PoE UniFi Switch (e.g. US-8-150W) and any other standard POE switch and/or 802.3af PoE injector. Power consumption is typically 5W, leaving ~7.5W available if active lighting is desired additionally over PoE/etc.

The reset button resets the OAK-SoM-Pro only. The 5V LED indicates 5V power is present on the PoE Board. The PG LED indicates "power good" from the OAK-SoM-Pro. The “RUN” LED indicates that the OAK-SoM-Pro is not in reset.