DeepWater Exploration 7-Port Multiplexer Board
Description
- 7-Port Multiplexer Board by DeepWater Exploration
- Includes a JST-PH 2.0 power connector
- Connect up to 7 exploreHDs via a single USB port
- Easy to mount on the most popular underwater systems
- Doesn't require soldering
- Deliverable Wattage: 35 W
- USB Output Connection: USB Type C
The DeepWater Exploration 7-Port Multiplexer Board providing underwater robots the ability to perceive the ocean is an important mission behind DWE cameras. With the exploreHD Multiplexer, you can now connect 7 cameras in one port with low latency and extreme reliability. Whether you are looking to increase the efficiency of your mission, improve the capabilities of your autonomous systems, or add further tooling options in your vehicle, the exploreHD Multiplexer board will enable you to complete these goals by providing you with the vision needed.
Designed to be as easy to use as possible - plug and play with these cameras, no soldering required, no drivers needed, and easy to mount on the most popular underwater systems (BlueROV, Raspberry Pi, etc). With the new option to purchase the exploreHD with pre-installed PAP-04V-S JST crimps, you can easily install your cameras onto the multiplexer board - No soldering required! This camera provides an image that is sharp and clear even in low light.

An additional 4 screw holes on the exploreHD Multiplexer allow it to be easily installed on the Blue Robotics BlueROV and BlueROV2 electronics stack. With 4 standoffs, it can be attached to the top side of the Tether Interface Unit without obstructing any functions.
Connect up to 7 exploreHDs via a single USB port while maintaining each camera's low latency and high reliability. Compatible with the plug-and-play software, you can freely adjust bitrate, compression format, streaming option, and more. Simple control over your cameras is at your fingertips. The screw holes on the exploreHD Multiplexer perfectly align with those on the Raspberry Pi, so you can easily install it onto the reverse. The carefully-placed cut-outs allow your connectors to be installed with minimal wasted space.
- 1x exploreHD Multiplexer Board
- 1x JST-PH 2.0 Power Connector
- Deliverable Wattage: 35 W
- Input Voltage: 5 V
- USB Output Connection: USB Type C
- Power Input Connection: JST-PH 2.0
- USB Input Connector: Housing: PAP-04V-S JST | Crimp: SPHD-002T-P0.5
- Hi-Speed (480 Mbits/s), Full-Speed (12 Mbits/s), and Low-Speed (1.5 Mbits/s) compatible
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
European consumers exercising their statutory Right of Withdrawal are subject to different conditions. See the Statutory Right of Withdrawal.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A €100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables * — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly * — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps * — Final sale only, due to licensing restrictions.
- Clearance Items * — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items * — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
* European consumers retain their statutory Right of Withdrawal on these items. Its exercise is subject to the conditions and exclusions set out in the Statutory Right of Withdrawal, and any reimbursement may be reduced to reflect a loss in value resulting from handling beyond inspection.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets, or contact us through our Support Center.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".