9g Continuous Rotation Micro Servo
Description
- Micro 360 Continuous rotation analog servo
- Operating Voltage: 4.8-6Volts
- Plastic gears
- Speed: 0.12sec/60degree
The 9g Continuous Rotation Micro Servo is the most affordable continuous rotation servo on the market and includes three types of servo horns. Use it to make a mini 2WD robot without the need for a motor controller!
Version 2 updates:
- Dead band expand from 10us to 90 us
- Use SMD potentiometer
- Size: 23.2 X 12.5 X 22.0 mm
- Operating Voltage: 4.8V - 6V
- Free-run current 6V: 200mA
- Stall current 6V 600mA
- Speed (4.8V): 110RPM
- Speed (6V): 130RPM
- Stall torque (4.8V): 18oz-in / 1.3 kg-cm
- Stall torque (6V): 21oz-in / 1.51 kg-cm
- Connector Wire Lenght: 20cm
- Required Pulse: 900us-2100us
- Direction: CCW
- Operating Angle: 360 degrees
- Weight: 9g
Travailler comme il se doit
Nothing fancy, but low price, and it can push a fairly decent load, so I'd recommend it
Rien d'extraordinaire, mais un prix bas, et il peut pousser une charge assez décente, donc je le recommanderais
We ordered some servos that we intended to hack for continuous rotation, and when the time came, they were not hackable :-( Seems like that happens a lot. You don't want that to happen at the last minute. These worked great. Thanks!
I bought a bunch of these servos about one year ago and they were great. Speed control needed some minor calibration, but that was expected. Hardware calibration was done with a flathead trimpot flush with the rear of the casing. However, I recently ordered these same servos. Now, the trimpot has been moved far inside the servo housing, and is a phillips head. A small philips had to be inserted through a small hole in the casing to access the trimpot, which was mounted at an awkward angle within the motor. It was much more difficult to calibrate, and thus use, these servos. Otherwise, the servos have good speed and torque, capable of driving a small robot. Wires are slightly weak and prone to breakage if appropriate strain-relief measures are not taken.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
European consumers exercising their statutory Right of Withdrawal are subject to different conditions. See the Statutory Right of Withdrawal.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A €100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables * — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly * — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps * — Final sale only, due to licensing restrictions.
- Clearance Items * — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items * — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
* European consumers retain their statutory Right of Withdrawal on these items. Its exercise is subject to the conditions and exclusions set out in the Statutory Right of Withdrawal, and any reimbursement may be reduced to reflect a loss in value resulting from handling beyond inspection.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets, or contact us through our Support Center.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".