Description
- 2WD Arduino mobile robot development platform
- Low-cost Arduino microcontroller mobile platform
- Two differential drive
- Caster ball included
- Complete chassis with mounting hardware
The 2WD Mobile Platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller. The robot comes as a kit which includes two drive motors, wheels (and rear caster ball), frame and all mounting hardware.
The DFRobot 2WD robot is widely used as a development platform for the Arduino microcontroller. Arduino has world's largest number of users when it comes to hobby microcontrollers and there is a lot of code and project examples available. The differential drive allows for a near zero turning radius while the high-strength aluminum alloy body plus high-quality high-speed motors make it suitable for flat indoor surfaces and flat-platform robot completitions. The top layer includes a standard servo socket and the three optional sensor holder. This three sensor holder fits with our adjustable IR range sensor. The servo can be used for a simple rotation platform, a two degrees of freedom camera holder or even a robotic arm.
To make this lovely robot run, you will need a motor controller and microcontroller board. The Romeo V2 All-in-one Microcontroller (ATMega32U4) is an ideal candidate for this, it includes an Arduino compatible platform directly programable via USB, a motor controller with external power option, integrated optional buttons and sensor connection sockets like our famous expansion shields.

Assembly:
- Connect each motor to the vertical supports using the included screws and nuts
- Wire the motors
- Mount the ball caster in the lower frame
- Screw the on/off switch and power plug into the top frame
- Wire the on/off switch and power to your motor controller
- Srew the top frames to the lower frame
- Connect the wheels to the motors
- The additional metal parts are used at your discretion but are not necessary.
The tie wraps can be used to hold the battery in place
The sensor mounts can be used however you see fit
- Two drive motors
- Wheels (and rear caster ball)
- Frame and all mounting hardware
- Wheel diameter: 65mm x 25mm wide
- Dimensions:
- 170mm diameter base
- 57mm height (not including wheels)
- Motor: 28mm height, 40mm length
- Battery pack: 80mm x 58mm
- Sensor mount: 34mm high x 25mm wide
- Weight: 400g
PDF Files
- 2WD Arduino mobile robot development platform
- Low-cost Arduino microcontroller mobile platform
- Two differential drive
- Caster ball included
- Complete chassis with mounting hardware
- Dimensions: 170mm diameter base
- Weight: 445g
- DFRobot 6V,180rpm Micro DC Geared Motor with Back Shaft
You need to buy more
An ideal starting platform for those new to the world of robotics. Quality of the components is great for the price and looks quite nice once its assembled.
My son enjoyed this as a starter robot.
Mon fils a apprécié cela en tant que robot de démarrage.
The motors and wheels are not the highest quality, but they're good enough for entry level robotics. The chassis is outstanding - very sturdy and easy to fix controllers and sensors to.
Estimate shipping
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Please review the Return Conditions, Return Exceptions and the process on How to Request a Return Authorization (RA) before initiating a return request.
European consumers exercising their statutory Right of Withdrawal are subject to different conditions. See the Statutory Right of Withdrawal.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
- A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
- The RA number is valid for 30 days. The returned item must be received within that period.
- The RA number must be included with the return.
- Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
- Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
- Refunds are processed within 7 days after receipt and inspection of the returned item.
- A €100 cleaning fee may apply to domestic robots returned in used or unclean condition.
- A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
- Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
- Consumables * — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
- Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
- Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
- Build-it-yourself products and items requiring customer assembly * — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
- Digital Goods, Software, and Apps * — Final sale only, due to licensing restrictions.
- Clearance Items * — Products identified as clearance or final sale, including end-of-life or discontinued items.
- Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
- On-Demand Items * — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
- Professional & Specialized Equipment — See the Professional & Specialized Equipment Warranty page and Professional & Institutional Buyers (B2B) section in the Terms & Conditions.
* European consumers retain their statutory Right of Withdrawal on these items. Its exercise is subject to the conditions and exclusions set out in the Statutory Right of Withdrawal, and any reimbursement may be reduced to reflect a loss in value resulting from handling beyond inspection.
How to Request a Return Authorization (RA)
While the same return policy applies, these orders require a separate contact process for returns.
- RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets, or contact us through our Support Center.
- Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".